Weather Monitoring – DESIGN ENGINEERING | EPC | PMC | COMPLIANCE MANAGEMENT

Meteorology Monitoring Solutions

Etengy provides the complete solution of meteorological and environmental monitoring system. Our range of automatic weather monitoring systems includes various transmitter wind speed and wind direction, humidity, temperature, pressure, radiation, precipitation and many others alternative as follows.
• Supply and Integration for Automatic Weather Stations (AWS)
• Earthquake Early Warning Systems, Seismographs and Accelerometers
• Lightning Detection System

 Hydrological Solutions
• Automatic Rain Gauge Station
• Flood Forecasting and Management Center
• River Discharge modeling

 Agricultural Solutions
• Agricultural Weather Station
• Soil Measurement Sensors and Plant Moisture Systems
• Pyranometers, Light Sensors, UV Sensors, Lux Sensors, Radiation Sensors

Weather RADAR Solutions

Etengy provides multiple ranges of weather radar systems with local maintenance services s as per customer demands, which are commonly specified as a compact and cost-efficient solutions for hydrology, aviation, population and asset protection, agriculture, research, gap-filling, early warning systems. .

We have also expertise weather radar engineers to integrate, commission, and maintenance of weather radars of X-Band, C-band and S-band with well-equipped testing instruments like PowerMeter, Oscilloscope, FrequencyCounter, Attenuator, SignalGeneratorandothertestequipmentforRADARcalibration. We will also able to perform monthly, half yearly and yearly periodic calibrations such as antenna leveling, return loss, exciter checking, rf power measurement, peak power, klystron peak current, pulse length, occupied bandwidth, burst pulse & spectrum, test signal attenuation, system calibrationetc.

Industrial Solutions

Industrial Weather Stations are configured to provide plant operators with the weather data needed for operations, regulatory compliance, safety and emergency response. The systems use reliable and accurate sensors to measure the weather variables of interest. We are providing

Electric Power Industry Solution

Electric Power industrial micro weather station is used for real-time monitoring to micro weather environment of high-voltage output, to avoid destroying the transmission wire caused by ice and snow, strong wind, frozen rain and other bad weather environments.

Solar PV industries Solutions

In the aeras with rich solar energy, solar power generation has been playing a more and more important role in power supply. Atmosphere environments have decisive effects on solar generation. Providing the accurate measure for atmosphere status is the important premise that assesses solar resource and design, build, maintain generation systems.

Etengy provides Automatic Weather Station, is used to measure the PV module temperature, wind speed & direction, Atmospheric temperature & RH, total radiation, sunshine time and etc. It is for evaluating solar power generating rate, fault diagnosis, data management.

Weather Services for Aviation

Aeronautical Meteorological Observation services are automated. These services include the observation of wind direction, wind speed, the Runway Visual Range (RVR), temperature, air pressure, precipitation, etc., after setting the Aerodrome Meteorological Observation System (AMOS), in each civil airport and region-controlled airport across the nation.

Etengy provides the both equipment& software supportsfacilities to analyzes aviation observation elements and then conducts various observation activities, such as METAR, local MET Report, SPECI, and local SPECIAL in order to produce and provide weather information necessary for flight safety.

Supply and Integration for Automatic Weather Observation Stations (AWOS)
Supply and Integration for Helipad Automatic Weather Observation Stations (HAWOS)
Modernizations of Avionic Meteorological Services

Environmental Air Monitoring Solution

The city aims to become the smartest city in India by implementing advanced and intelligent solutions for a cleaner and greener city. Now environmental monitoring to create awareness among the public of the current pollution level. Hence, it became Etengy mission to monitor the air quality of the city strictly.

Etengy provides complete end to end solution for Environmental monitoring as follows.

Water quality monitoring
Air quality / pollution monitoring
Trace gas monitoring
UV Spectro photometer for Ozone monitoring

The integrated network solutions are available and our expertise in providing integrated turnkey solution as per customer requirement. Etengy provides RF/GSM/GPRS communication for all environmental monitoring.

Road Weather Solutions

Etengy provides a second line of communication can be set up to give access to real-time weather data to third-party services. Road weather stations measure real-time atmospheric parameters, pavement conditions, water level conditions, and visibility. Central RWIS hardware and software are used to process observations from Environmental Sensor Stations (ESS) to develop nowcasts or forecasts, and display or disseminate road weather information in a format that can be easily interpreted by a manager.

Weather Data:
• Visibility and present weather
• Wind speed and direction
• Precipitation type and intensity
• Air Temperature and RH
• Barometric Pressure
• Lightning
• Gases / Air quality

Pavement data:
• Pavement and subsoil temperature
• Surface freezing point
• Pavement status (for example wet, icy, flooded)
• Chemical Concentration of Anti-icing Fluids on Pavement

Coastal Oceanography Solutions

We Etengy provide all types of weather and sea monitoring at coastal environment and provides state of art-integrated solutions with high-resolution data loggers, which are used for acquisition of marine data at the remote sites.

Underwater Marine Sensors
Harvesting power from the ocean, through spinning underwater turbines or bobbing wave-energy converters, is an emerging frontier in renewable energy. Researchers have been monitoring how these systems will affect fish and other critters that swim by. But with most available technology, scientists can get only occasional glimpses of what’s going on below.

Environmental Buoys and Mooring Equipment
A buoy-based system must be moored to ensure that it remains stationary. The buoy is usually moored via a stainless-steel mooring line, bottom chain and anchor. It is recommended to moor the buoy in the deepest part of the waterway to ensure the most inclusive measurements. This allows for multiple measurement depths and will best reflect the characteristics of the water body as a whole. We are providing Buoy-based systems are typically moored as either a single-point or two-point mooring, based on environmental and application-specific factors.

System Installation, Commissioning & Maintenance

Our technical expertise is handy with heavy mechanical, electrical, civil and software to perform a complete satisfactory installation of weather monitoring systems. We follow below sated processes for installation & commissioning activity.

First of all, System is installed by the OEM and watched over by OEM trained and certified Etengy Engineers.
Secondly system is installed by OEM trained and certified Etengy engineers and monitored by the OEM Engineers.
All subsequent installations are handled by OEM trained and certified Etengy Engineers on their own.
Site Acceptance Test can be performed either OEMor by the Etengy Engineers or by both.

Training

Etengy Engineers are trained and certified by the Original Equipment Manufacturer for their products. Etengy engineers also prepares the complete training material with support from the OEM. Trained Etengy engineers also perform the Installation, Testing and Commissioning for the product at the customer site with well-equipped testing equipment. Post-installation, trained engineers efficiently support the OEM products at customer site during the warranty and maintenance period. During the maintenance phase, engineers are periodically trained by the OEM on the upcoming upgrades introduced by the OEM.For Maintenance activities, Engineers typically provide Level 1 and Level 2 support for OEM product along with third party items. Level 3 Support is typically provided by the OEM for their items.

Supply of Third-Party Items

Etengy procures third party items required for various projects and Etengy has well established procedures to procure third party from local vendors at competitive price. This plays an important role in reducing the cost of system solution and long-term maintenance costs thereby maximizing the chances of winning the bids.

Spare Inventory Management

Quantity of spares to be stocked maintained by Mean Time Between Failures (MTBF), Population Stocked
and Turnaround Time (TAT). Etengy CRM software provides accurate information on estimated MTBF, installed base, TAT andSLA agreed with customer. Etengy have that much of inventory space to managed both OEM local third-party spares in a specified storage environmental condition.